> Flat-Bed Latche CNC Lathe

Flat-Bed Latche CNC Lathe

平床身數控車床

  • STURN-32
  • CY-K360n
  • CY-K510n
  • CY-K630n (B)
  • CY-K800n (B)

Page: 2

Enquiry now

Application

The Flat-Bed CNC Lathes are economical and practical CNC lathes. With optimized structures, unfailing performance, high quality, simple programming, and easy handing, they are suitable for turning of complicated shaft, sleeve, and disk type work-pieces such as turning of internal and external cylindrical, conical, arc surfaces and various threads, and even drilling, boring and reaming holes. And they are especially fit for turning of diversified work-pieces on small and medium batches. They are of high versatility, high efficiency, low inferiority and good conformability. So to be widely used in various trades, such as automobile industry, electronic part, heavy equipment.

Features

  • The specially designed Independent Spindle structure ensures the maximum heat dissipation and brings down the heat distortion.
  • Unique design brings high precision, high rigidity and low noise performance in turning.
  • Servo motor drive is standard spindle drive.
  • The optional Teach-In function of CY-K360n series makes the quick and simple setup, programming and easy to operate.
  • Single piece leg and double triangle guide ways ensures heavy cutting and high accuracy for CY-K660.
Specifications Unit STURN-32 CY-K360n CY-K510n CY-K630n (B) CY-K800n (B)
Max. swing over bed mm ∅ 360 ∅ 410 ∅ 500 ∅ 630 ∅ 800
Max. length of workpiece mm 750 750, 1000 750, 1000, 1500, 2000 1000, 1500, 2000 1500, 2000, 3000
Max. diameter of cross slide mm ∅ 160 ∅ 220 ∅ 290 ∅ 340 ∅ 510
Max. travel of X axis mm 205 235 250 420
Max. travel of Z axis mm 640 670, 920 670, 920, 1420, 1920 850, 1350, 1850 1350, 1850, 2850
Width of bed mm 280 300 390 600
Rapid feed speed X/Z m/min X=4, Z=8 X=6, Z=8 X=8, Z=12 X=4, Z=8
Positioning accuracy X/Z mm X=0.020, Z=0.032 X=0.024, Z=0.032 X=0.024, Z=0.04 X=0.03, Z=0.04
Repeatability X/Z mm X=0.01, Z=0.015 X=0.01, Z=0.013 X=0.01, Z=0.016 X=0.012, Z=0.017
Tool post 4 / 6 position electronic tool post
Section specification of tool post mm 20 x 20 25 x 25 32 x 32
Diameter of tailstock quill mm ∅ 52 ∅ 65 ∅ 75 ∅ 100
Max. travel of tailstock quill mm 100 127 150 250
Taper bole of tailstock quill MT 4 MT 5 MT 6
Spindle nose A2-5 A2-6 A2-8 A2-11
Spindle bore mm ∅ 52 ∅ 82 ∅ 104 (130)
Main motor kW 3.7 5.5 7.5 or 11 11 15
Spindle speed and spindle drive rpm Servo motor drive spindle speed
35-2500 35-160, 140-620, 580-2500 21.5-108, 60-300, 240-1200 25-125, 60-300, 240-1200
3-jaw chuck mm Manual jaw chuck ∅ 160 Manual jaw chuck ∅ 200 Manual chuck ∅ 250 Manual chuck ∅ 325
Coolant pump Watt 100
Lubrication device 15 min/time, 3-6 ml

Standard Accessories

  • GSK controller
  • Servo motor drive
  • Manual tailstock
  • Heat exchanger
  • Lubrication pump
  • Illumination lamp
  • Center & center sleeve
  • Full set of wrenches
  • Foundation bolts
  • Damping cushion

Optional Accessories

  • Hydraulic 3-jaw chuck Hydraulic tailstock
  • Steady rest & Follow rest
  • Driving plate

The descriptions, illustrations and specifications given herein are subject to alteration without notice and thus without any obligation.